Mighty Hoop 4.375" Round - SWF

This hoop has an inside dimension that is 4.375" round. That dimension is the same size as a standard Tajima 12cm hoop, as well as many other hoop brands. Please note that your actual sewing area will be determined by the size of your presser foot. Most machines will be able to sew approximately 3 3/8 to 3 5/8". This Mighty Hoop was designed for items like sleeves and cap backs. It was not made to hold thick and heavy items, like the original Mighty Hoops. It was designed with smaller magnets allowing it to have a smaller outer ring. This makes it easier to get into tight areas. It will not be able to hoop thick bags, workwear, leather, or other difficult fabric. The 4.25"square Mighty Hoop would be a better option for that type of embroidery. The 4.375" Mighty Hoop will fit most commercial embroidery machines, including the Brother and Baby Lock 6 and 10 needle machines.

The inside dimension of this hoop is 4 3/8" (4.375", or 111mm)

Actual sewing area is approximately 3.6" or 91mm (depends on the brand of machine)

Please select your machine sewing field width from the options below before ordering. Sizes in millimeters below are measured from end to end on the outside of your hoop brackets (Example pictured to the left)

Due to COVID-19, delivery times may be longer than normal. We’re working hard to deliver your order as soon as possible.